EMP Centauri E-Lite Class Multischalter MS 5/12 ELP-4 Powerless

The new power-saving Elite EMP MS5 / 12 ELP-4 multi-switch from EMP-Centauri is a 5 in and 12 out multi-switch.

In the standard version this is suitable to provide a satellite position as well as terrestrial for 12 participants. Terrestrial signal can be fed into the corresponding input socket and is then available at the outputs. The SAT / Terrestrial signal is separated by means of satellite sockets at the terminals.

The EMP MS5 / 12 ELP-4 has only minimal losses in the satellite range (5dB) and can therefore easily be used in distribution systems with longer cable routes.

A further advantage is that the multicaster is fed by the connected satellite receiver. From each receiver voltage is transferred to the input SAT 2 terminal. Optionally an external power supply can be connected (not included in the scope of delivery), which then supplies the LNB and also TERR inputs.

Technical specifications:
EMP Multi-Switch E-Lite Class MS5 / 12 ELP-4, currentless
Frequency range LNB inputs 950-2150MHz
Terrestrial input 5-862MHz
Outputs 5-2150MHz
Control 13V / 18V + 0 / 22kHz
Loss Sat. 5dB avg
Loss Terrestrial 19dB avg
Isolation Sat- inputs min. 20dB
Maximum input signal Sat. / Terr. 90dBµV / 110dBµV
Maximum output signal Sat. 85dBµV
Maximum output signal terr. 91dBµV
Power consumption of receiver 50mA
Dimensions: L x W x H 182 x 152 x 45mm)
Temperature range -30 ... + 70 ° C

Important instructions:
This multi-switch can only be used in conjunction with Quattro LNB. The DC connector allows you to connect an external power supply (not supplied). With this, e.g. an amplifier and / or vertical / high of the LNB can be supplied with voltage via the terrestrial connection.