Gibertini Sat Antenna XP Premium Alu Sat Dishes

Attractive design, high stability and rich reception strength, extreme corrosion resistance, and maximum degree of pre-assembly characterize this series of antennas.

Fasten the antenna, snap in the feed arm, secure with the toggle screw, click in the LNB, connect the cable and the X is ready to receive for alignment.

Reflectors are made of polyester-coated aluminum in anthracite, light gray, or brick red. The back holders made of Sendzimir hot-dip galvanized steel is also coated in mirror color, as are the aluminum feed arms.
Hardware geomet coated or inox
Feedholder Premium 40 mm
vibration-ground die-cast aluminum

Specifications 85XP:
Size: 85.0 x 90.5 cm
Efficiency: 70%
Antenna gain 12.75 GHz: 39.20 dB
Cross polarization isolation: -26dB
Sidelobe Reduction: -24dBc
Noise figure 30° elevation: 40K
F/D ratio: 0.67
The opening angle at -3 dB(¹) at 11.7GHz: 1.95
Elevation angle range (deg): 0 - 80
Offset correction angle: 21.1
Mast mount (mm) 30-90mm
Material thickness aluminum reflector (mm): 1.2
Wind load 120 km/h: 75 kg
Net weight with aluminum reflector (kg): 6.2
Operating temperature: -30°C +70°C
Back part lacquered in mirror color

Specifications 100XP:
Frequency range (Ghz): 10.00-13.00
Pole mount: 30 - 90 mm
LNB mount: 40mm
Dimension: 97.0cm x 104cm
Gain: >39.95 dB at 11.70 GHz
Elevation angle range (deg): 0 - 80
Wind load 120 km/h: 91 kg

Delivery:
1x aluminum mirror XP professional series with 6 point attachment
1x ALU feedarm with cable bushing
1x back part completely painted with adjustable elevation angle.
1x ALU die-cast LNB bracket for 40mm LNBs
1x set of screws
2x mast mounting clamp for mast diameters of 30-90mm