DUR-line DPC-32K LNB Unicable I + II Wideband Multi-Switch + 2x LNB set for 32 participants

With this unicable switch, both wideband and normal Quattro LNBs can be operated. When using 2 x wideband LNBs, up to 32 participants can simultaneously receive up to 2 satellite positions (e.g. Astra 19 degrees and Eutelsat 13 degrees). When using a wideband LNB, only half the cables are required.

Features:
- The switch can be operated with both wideband and normal Quattro LNBs
- The Legacy Out output can also be programmed as a 2nd output. This gives you 2 outputs for 16 participants each
- You can connect 8 x devices with EN50494 (old standard) or EN50607 (new standard) + 24 devices EN50607 (new standard) to each of these outputs
- Reprogramming to static single-cable system possible
- Now you can merge up to 32 transponders from different satellites at an absolute bargain price. That corresponds to over 100 different programs
- Can be cascaded (64 participants)

Note:
The switch is shipped from the factory configured for Quattro LNB operation.

Entrances:
- 4x satellite IF inputs from the Quattro LNB, (4 x wideband inputs, satellite 1: V & H, satellite 2: V & H)
- 1x UHF / VHF input for terrestrial antennas

Outputs:
- 4x satellite IF loop-through outputs (also wideband)
- 1x terrestrial loop-through output,
- 1x legacy output with the combined terrestrial signal,
- 1x unable output with a maximum of 32 user bands and terr. signal

Control protocol:
- DiSEqC1.x/DiSEqC2,0, EN50494/EN50607

Technical specifications:
- User band channel (gain ripple): 3 dB max.
- Output level (AGC): 90dBµV
- Input level: min. 67 to max.100dBµV
- Satellite channel / channel: 28 dB min.
- System phase noise: 1.5 degrees max.
- Input/output VSWR: 2.5: 1
- Input / output impedance: 75 ohms
- Legacy output: F-Type
- Legacy output: V / L => 13V/0kHz, V/H => 13V / 22kHz
- Legacy output: H/L => 18V/0kHz, H/H => 18V/22kHz
- LNB power supply: Max.300mA at 13-18V
- DC current consumption: 500mA max.at 13VDC
- Operating temperature: -20 to + 60 ° C
- Dimensions: 113.5 x 110.5 x 20.8mm (W x H x D)

Communication takes place in accordance with EN50494 (Unicable I) and/or EN50607 (Unicable II / JESS) and can be defined for each user band. This enables installations consisting of only EN50494-compatible or EN50607-compatible TVs, PVRs.

DUR-line® + Ultra WB2 - Wideband LNB
The DUR-line® + Ultra WB2 wideband LNB belongs to the latest generation of LNBs. Instead of the previous four outputs for the individual levels, two outputs are now available.
ATTENTION: No twin LNB (operation only with wideband Multi-switch)

Delivery:
1x DPC32 K 32 Multiswitch
2x WB2 Wideband LNBs
5x F Connector
1x Power Inserter
1x Power Supply