Inverto Unicable II 4x Legacy IDLU-UST110-CUO4O-32P Cascadable Multiswitch

The IDLU-UST110-CUO4O-32P is a compact, cascadable Unicable II multiswitch with 4 outputs, which have automatic signal detection and can be operated in both Unicable II and Legacy mode. The multi-switch can be used with a Quattro LNB (delivery condition) or two wideband LNBs for the reception of 2 satellites. It is possible to feed in a terrestrial antenna signal for receiving UHF/VHF/DAB/radio via the terrestrial input. If desired (on/off switch), the terrestrial signal can also be output amplified via all 4 outputs. Upon delivery, all outputs work in legacy mode and can be controlled either by 13/18V+0/22kHz or by DiSEqC1.0/2.0 commands. The output switches to unicable mode as soon as it receives an EN50494 or EN50607 signal and then provides 16 user bands (please refer to the specifications for the frequency table).

The IDLU-UST110-CUO4O-32P is a compact, cascadable Unicable2 multiswitch with 4 outputs, which have automatic signal detection and can be operated in both Unicable II and Legacy mode. The multi-switch can be used with a Quattro LNB (delivery condition) or two wideband LNBs for the reception of 2 satellites. It is possible to feed in a terrestrial antenna signal for receiving UHF/VHF/DAB/radio via the terrestrial input. If desired (on/off switch), the terrestrial signal can also be output amplified via all 4 outputs. Upon delivery, all outputs work in legacy mode and can be controlled either by 13/18V+0/22kHz or by DiSEqC1.0/2.0 commands. The output switches to unicable mode as soon as it receives an EN50494 or EN50607 signal and then provides 16 user bands (please refer to the specifications for the frequency table). A status LED near each outlet provides information on the current operating mode of that port. (green = legacy mode, flashing green = UnicableII mode, flashing red/green = diagnostic function)

Optional Accessories (Sold Separately)
MDU power supply can supply up to 4 multi switches + LNB (19V, 3.5A) IDLU-ADPT01-19V3AO-OPP
Power inserter with an external power supply (19V, 0.94A) IDLU-PINS02-OOOOO-OPP

Technical Info
Inputs:
4 x IF inputs:
1x Quattro LNB (delivery condition)
2x wideband LNBs
1 x UHF / VHF input for terrestrial antennas

Outputs:
4 x satellite IF loop-through outputs
1 x terrestrial loop-through output
4 x UnicableII/Legacy connectors with the combined terrestrial signal. State of delivery: Legacy mode after switching on, which switches to Unicable mode after receiving an EN50494/EN50607 signal

Control protocol: EN50494 (SatCR), EN50607 (dCSS), DiSEqC1.0/2.0, 13/18V+0/22kHz

LNB power supply 500mA max. @18VDC
DC Current Consumption 600~900mA @10~20VDC [Max.]
Operating temperature - 20 ~ + 50 °C
Protection class IP54
Dimensions 152 x 113 x 29 (H x W x D) mm

* Programmer not included, sold separately as an accessory.

Delivery
1x Inverto Unicable II IDLU-UST110-CUO4O-32P user manual